Sensor/detection principle: Photoelectric retro-reflective sensor

Housing design (light emission): Cylindrical, straight, straight

Housing length: 78 mm

Thread diameter (housing): M18 x 1

Optical axis: Axial

Sensing range max.: 0.05 m ... 3.7 m 1)

Sensing range: 0.05 m ... 3 m 2)

Type of light: Visible red light

Light source: LED 3)

Light spot (distance): 150 mm (3 m)

Sensitivity adjustment: Potentiometer, 270°

Angle of dispersion: 2.8 °

1) 2) C110A  3) Average service life of 100,000 h at TA = +25 °C   

Mechanics/electronics

Supply voltage: 10 V DC ... 30 V DC 1)

Ripple: ≤ 10 % 2)

Power consumption: ≤ 30 mA 3)

Output type: PNP, Light/dark-switching, Selectable via L/D control wire, open collector 4)

Output current Imax.: 100 mA

Response time: ≤ 2 ms 5)

Switching frequency: 250 Hz 6)

Connection type: Connector M12, 4-pin

Circuit protection: A, B, C, D 7) 8) 9) 10)

Protection class: III

Weight: 120 g

Polarisation filter:

Housing material: Nickel-plated brass

Optics material: PMMA

Enclosure rating: IP 67

Ambient operating temperature: -25 °C ... 70 °C

UL File-No.: UL No. NMFT2.E175606

1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) Control wire open

: dark-switching D.ON  5) Signal transit time with resistive load  6) With light/dark ratio 1:1  7) A =

 VS connections reverse-polarity protected  8) B = inputs and output reverse-polarity protected  9) C =

 interference suppression  10) D = outputs overcurrent and short-circuit protected  Control wire open:

 dark-switching D.ON